![\"\"](\"http:\/\/he-entwicklung.de\/wp-content\/uploads\/2021\/02\/lkw-fahrerselbstbedienung-he-waegetechnik.jpg\")
<\/figure>E.ON Kraftwerk Staudinger driver self-service via card reader terminals with receipt output (receipt) and vehicle position monitoring<\/p>\n<\/div><\/div>\n\n
With our EWP weighing software<\/strong>, you can carry out your dispatching as required.\nThe driver activates dispatching for the weighing process using his card after he has positioned his truck on the scales.\nIf data was not yet available at the time of scheduling, it can be added by the driver by entering it on the device.\nOnce all the data is available, the initial weighing is carried out automatically and the truck can be loaded or unloaded. <\/p>\n\n For the second weighing, the driver identifies himself again with the card.\nThe data from the second weighing is added to the first weighing carried out previously.\nThe system automatically recognizes whether your material has been delivered or removed.\nManual operation or additions to the data via the weighing workstation are possible at any time. <\/p>\n\n If the empty vehicle weight is stored in the system, it is even easier and faster.\nThe loaded vehicle is driven onto the scales.\nThe driver identifies himself with the card and the weighing is triggered automatically. <\/p>\n\n Mibau, Cuxhaven Driver self-service via touchscreen PC and contactless card reader with receipt output<\/p>\n<\/div><\/div>\n\n Receipts (routing slips, delivery or weighing slips) can be printed out after the first and second weighing.\nA printer with a presenter device is often selected for the printout.\nThis only outputs the receipt after the printing process has been completed, thus preventing inexperienced users from causing a paper jam by tearing it out prematurely.\nA built-in clamp system holds the receipt in place and protects it from “impatient fingers” until printing is complete and the receipt can be presented undamaged. <\/p>\n\n By positioning the device technology directly next to the scales, it can be operated from the driver’s cab.\nThe EWP-TS operating software is available in several languages. <\/p>\n\n City of Osnabr\u00fcck – Piesberg landfill site Driver self-service via card reader terminals with receipt output (DIN A4) and vehicle position monitoring<\/p>\n<\/div><\/div>\n\n The correct vehicle position is monitored by installing modern sensor technology.\nUltrasonic sensors have the advantage of being insensitive to dirt.\nIf the vehicle is not correctly positioned on the scales, it will not be weighed.\nIn addition, a network camera can be used to save an image for each weighing operation carried out.\nFurthermore, the camera image is permanently displayed in the weighing program. <\/p>\n\n The device technology used is connected to each other via a network, meaning that data can be transmitted at a speed of up to 100 Mbit.\nCommunication is therefore many times faster and more secure than was previously the case with serial connections. <\/p>\n\n All devices are controlled by the EWP software, which offers unimagined possibilities for mapping your individual operating processes and is extremely user-friendly.<\/p>\n\n![\"\"](\"http:\/\/he-entwicklung.de\/wp-content\/uploads\/2021\/02\/fahrerselbstbedienung-he-waegetechnik.jpg\")
<\/figure>![\"\"](\"http:\/\/he-entwicklung.de\/wp-content\/uploads\/2021\/02\/terminal-he-waegetechnik.jpg\")
<\/figure>